Stackmatch 6x2

RM6AA Stackmatch 6x2 (also Power Splitter 6x2) propeties:

 

Number of antennas  -  1...6

Number of TRX  -  2 (1) 

Sockets isolation  -  more than 50db

SWR TRX-ANT1  - better than 1.05

SWR TRX-(ANT1+ANT2)  -  better than 1.10

SWR TRX-(ANT1+ANT2+ANT3)  -  better than 1.30

 

Max POWER  -  5000 Watts!!!

 

 

 

Mode 1 - 6 antennas/1 TRX

Use 1 torroid + 4/6 TIANBO relays + 6 vacuum relays (B1B russian millitary relay)

You can replace 2 bottom relays by constant connector, but do not use ports 2, 3, 4 for High frequency bands (like 18MHz and higher).

If you use 6 TIANBO relays - please use port 1, 2, 3 for Higher frequencies.

 

Mode 2 - 6 antenas/2 TRX

Use 2 torroids + 4/6 TIANBO relays + 6 vacuum relays (B1B russian millitary relay)

Do not forget about bottom relays - if you can use all 6 antennas for first TRX!!!

You can replays bottom relays by connectors - in this way you can use 1, 2, 3 antennas for first TRX, and 4, 5, 6 antennas for second TRX.

CorelDRAW file for laser cutting (Case of Stackmatch)
6x2 case v6 cut.cdr
Compressed Archive in ZIP Format 1.4 MB
SPRINT Layout Stackmatch
Stackmatch 2x3.lay6
exe File 86.5 KB
Яндекс.Метрика